This interactive map illustrates possible pump applications. For detailed information and solutions that meet your specific requirements, please contact your PSG representative.
Sliding Vane Pumps
LG1 Pumps
Motor Speed Pump for Single Cylinder Filling
- Pumps are equipped with 1-in. NPT tapped parts and use an exclusive “combination” valve that acts as both a back-to-tank bypass valve and an internal safety valve (no separate bypass valve is needed).
- C-face or bracket mount option with direct motor drive
- Max flow rate 13 gpm (49.2 L/min)
- Max differential pressure 125 psi (8.6 bar)
- Self-priming, high suction capabilities enable line stripping
- Self-adjusting vanes keep performance consistency high
- UL listed
- Equipped with replaceable casing liner, end discs, and vanes
- Applications:
- Cylinder filling
- Motor fueling
- Small vaporizers
- Dispensers
LG1 Brochure
Sliding Vane Diagram
Sliding Vane Benefits
Sliding Vane Cavitation Liner
Dispenser Applications
Sliding Vane Action Video
Sliding Vane Pumps
LGL 1.25 - 1.5 Series
Motor Speed Pumps for Motor Fueling and Multi-Cylinder Filling
- Available in 1.25 and 1.5 inch models
- Equipped with internal relief valve
- Flange mounted or foot mounted with direct motor drive
- Max flow rate 33 gpm (125 L/min)
- Max differential pressure 150 psi (10.3 bar)
- Self-priming, high suction capabilities enable line stripping
- Self-adjusting vanes keep performance consistency high
- UL listed
- Equipped with replaceable suppression liner, end discs, and vanes
- Applications:
- Motor fueling
- Multiple-station cylinder filling
- Variety of small transfer jobs
LGL 1.25 & 1.5 Brochure
Sliding Vane Diagram
Sliding Vane Benefits
Sliding Vane Cavitation Liner
Sliding Vane Action Video
Sliding Vane Pumps
TLGLF Series
Multi-Purpose Pumps for Bulk Mobile LPG Applications
- 3 Available Models – 3-inch TLGLF3 and TLGLF3HD, and 4-inch TLGLF4
- Equipped with double-ended drive shaft for clockwise or counter-clockwise rotation
- Auxiliary intake port for emergency unloading of another tank or transport
- Flange-mount directly to a commercial internal control valve, in combination with the tank of a bobtail or transport
- PTO or hydraulic drive packages available
- Max flow rate of 350 gpm (1,325 L/min) for the TLGLF4. The TLGLF3HD has a max flow rate of 201 gpm (761 L/min) which is 55% greater than the 129 gpm (488 L/min) flow rate of the TLGLF3
- Max differential pressure is 125 psi (8.62 bar)
- Self-priming, high suction capabilities enable line stripping
- Self-adjusting vanes keep performance consistency high
- UL listed
- Equipped with replaceable cavitation suppression liner, end discs, and vanes
- Standard cavitation suppression liner reduces noise, vibration and harmful effects of cavitation
- Applications:
- Mounted to bobtail and transport trucks
TLGLF Brochure
Sliding Vane Diagram
Sliding Vane Benefits
Sliding Vane Cavitation Liner
Transport Applications
Sliding Vane Action Video
Sliding Vane Pumps
LGL 2 - 4 Pumps
Multi-Purpose Pumps for Bulk Plants, Terminals, and Truck Systems
- Pumps come in 2, 3, and 4 inch models
- Single or double-ended drive shaft available
- Available as truck mounted pumps driven by P.T.O or hydraulic drive system or standard based mounted V-bet or Helical Gear Reduction Drive
- Max flow rate 350 gpm (1,325 L/min)
- Max differential pressure 150 psi (10.34 bar)
- Self-priming, high suction capabilities enable line stripping
- Self-adjusting vanes keep performance consistency high
- UL listed
- Equipped with replaceable cavitation suppression liner, end discs, and vanes
- Standard cavitation suppression liner reduces noise, vibration and harmful effects of cavitation
- Applications:
- Bulk plant service
- Multiple cylinder filling
- Vaporizers
- Bobtail and transport loading and off-loading
LGL 2 - 4 Brochure
Sliding Vane Diagram
Sliding Vane Benefits
Sliding Vane Cavitation Liner
Bulk Plant Applications
Sliding Vane Action Video
Sliding Vane Pumps
LGL3021A Pumps
Drop-In Replacement Multi-Purpose LPG & NH3 Pumps
- Drop-in replacement for competitive pumps without changing piping connections or motor drives
- Max flow rate 210 gpm (795 L/min)
- Max differential pressure 150 psi (10.34 bar)
- Self-priming, high suction capabilities enable line stripping
- Self-adjusting vanes keep performance consistency high
- UL listed
- Equipped with replaceable cavitation suppression liner, end discs, and vanes
- Standard cavitation suppression liner reduces noise, vibration and harmful effects of cavitation
- Applications:
- Bulk plant service
- Multiple cylinder filling
- Vaporizers
- Bobtail and transport loading and off-loading
LGL3021A Spec Sheet
Sliding Vane Diagram
Sliding Vane Benefits
Sliding Vane Cavitation Liner
Sliding Vane Action Video
BOMBAS DE PALETAS DESLIZANTES
BOMBAS LGL3021A
Bomba multipropósito de reemplazo directo para GLP & NH3
- Reemplazo directo para bombas de la competencia sin cambiar conexiones de tubería o motores
- Máximo rango de flujo 210 gpm (795 L/min)
- Máxima presión diferencial 150 psi (10.34 bar)
- Autocebante, alta capacidad de succión
- Paletas autoajustables, mantienen su eficiencia volumétrica
- Certificación UL
- Equipada con camisa supresora de cavitación, discos y paletas
- La camisa supresora de cavitación reduce el ruido, vibración
- Aplicaciones:
- Plantas de almacenamiento
- Llenado de cilindros
- Vaporizadores
- Carga y descarga de pipas y/o transportes
LGL3021A Spec Sheet
Sliding Vane Diagram
Sliding Vane Benefits
Sliding Vane Cavitation Liner
Sliding Vane Action Video
Reciprocating
Gas Compressor
LB Series
- Appropriate for use with LPG, propane, butane, anhydrous ammonia
- Durable and robust single stage, 2 cylinder compressor with 10 different models
- Piston displacement up to 125 CFM (212 m3/hr)
- Working pressure up to 350 psia (24.13 bara)
- Single, double and triple seal models available to provide superior leakage control and prevents oil contamination of the compressed gas stream
- Superior valve design
- One piece piston design
- Wear parts are thicker, larger, and less complex than competitors
- Mounting – transport mounted, and can be adapted for either direct drive or V-belt drive
- Applications:
- Liquid transfer
- Vapor recovery
LB Compressor Brochure
Transfer LPG From Underground Tanks
Cylinder Tank Evacuation
Compressor Railcar Unloading
Compressor Action Video
Vapor Recovery Video
Regenerative Turbine Pumps
Ebsray RC Series
The RC Series are base-plate mounted regenerative turbine pumps ideal for dual hose and multiple dispensers in Autogas applications with above ground or underground tanks.
- Low maintenance single-stage impeller
- Quiet, smooth, pulse-free operation
- High differential-pressure capability
- Long pump life
- Three-ported design simple installation and safe operation
- Applications:
- Autogas driveway dispensing for up to four hoses
- Transfer and industrial dispensing
- Marine dispensing
- Portable tanks
- Cylinder filling
- Forklift refueling
- Direct burner or vaporizer feed
- Above ground and underground tank
RC20
- Max flow 16 gpm (62 L/min) at 60Hz & 13 gpm (48 L/min) at 50Hz
- For one hose dispensing
- Max differential pressure 145 psi (10 bar)
RC25
- Max flow 28 gpm (106 L/min) at 60Hz & 21 gpm (80 L/min) at 50Hz
- Up to 2 hose dispensing
- Max differential pressure 145 psi (10 bar)
RC40
- Up to 4 hose dispensing
- Max flow 53 gpm (200 L/min) at 60Hz & 44 gpm (165 L/min) at 50Hz
- Max differential pressure 200 psi (14 bar)
Ebsray RC Series - RC20/RC25/RC40 Brochure
Regenerative Turbine Action Video
Regenerative Turbine Technology
Autogas White Paper
Above Ground Autogas Tank Installations
Underground Autogas Tank Installations
Regenerative Turbine Pumps
Ebsray RX Series
Submersible Regenerative Turbine Pumps
The RX Series of submersible regenerative turbine pumps can be used for high-pressure pumping of Autogas from underground or above ground storage tanks.
- Single-stage regenerative turbine pumping element
- Quiet, smooth, pulse-free operation
- Submersible concept guarantees rapid priming and pressure generation
- High differential-pressure capability
- Applications:
- Autogas driveway dispensing for up to four hoses
RX10
- Up to 4 hose dispensing
- Max flow 27.91 gpm (103 L/min)
- Max differential pressure 130 psi (9 bar)
RX33
- Up to 2 hose dispensing
- Max flow 14.53 gpm (55 L/min)
- Max differential pressure 125 psi (8.6 bar)
Ebsray RX10 Product Brochure
Ebsray RX33 Product Brochure
Regenerative Turbine Action Video
Regenerative Turbine Technology
Autogas White Paper
Above Ground Autogas Tank Installations
Underground Autogas Tank Installations
Regenerative Turbine Pumps
HiFlow Series Regenerative Turbine Pumps
R80 & R82 – Base Mounted Large Volume Regenerative Turbine Pumps
- 75mm (3") inlet & discharge ports
- Operating speed range from 2,100 to 3,500 rpm
- R80 features flow rates of 150 to 500 L/min (39.6 to 132 gpm)
- R82 features flow rates of 180 to 600 L/min (47.6 to 159 gpm)
- Temperature range from -40°C to 100°C (-40°F to 212°F)
- Maximum working pressure of 30 bar (435 psi)
- Ni-Resist turbine impeller – provides unmatched durability and long operating life
- Sealed for life bearings protected from LPG ingress, and require no routine maintenance
- Balanced multi-spring carbon vs. silicon carbide mechanical seal provides years of trouble-free operational service
- Foot mounting
Ebsray HiFlow Series Product Brochure
Regenerative Turbine Action Video
Regenerative Turbine Technology
Ebsray R80/R82 Cutaway
Autogas White Paper
Regenerative Turbine Pumps
HiFlow Series Regenerative Turbine Pumps
R75 & R77 – Large Volume Truck Loading and Unloading Regenerative Turbine Pumps
- Driven by electric drive, hydraulic drive or high-speed PTO
- 3-inch (75mm) inlet ports
- 2-inch (50mm) discharge and auxiliary ports
- Features integral bypass valve set on 200 psi (14 bar) for R75
- Operating speed range from 2,100 to 3,500 rpm
- R75 features flow rates of 40 to 132 gpm (150 to 500 L/min)
- R77 features flow rates of 48 to 159 gpm (180 to 600 L/min)
- Temperature range from -40°F to 212°F (-40°C to 100°C)
- Maximum working pressure of 435 psi (30 bar)
- Ni-Resist turbine impeller – provides unmatched durability and long operating life
- Sealed for life bearings protected from LPG ingress, and require no routine maintenance
- Balanced multi-spring carbon vs. silicon carbide mechanical seal provides years of trouble-free operational service
- Flange mounted pumps
Ebsray HiFlow Series Product Brochure
Regenerative Turbine Action Video
Regenerative Turbine Technology
Ebsray R75/R77 Cutaway
Autogas White Paper
Regenerative Turbine Pumps
The regenerative turbine pump is a rotodynamic pump that combines the high discharge pressure of a positive displacement (PD) pump with the flexibility of a centrifugal pump. They excel at transferring fluids with high pressure, low flow and low viscosity while handling entrained vapors or fluids at or near their boiling point. These fluid conditions generally hamper the performance and reliability of most pump technologies, but regenerative turbine pumps maintain their efficiency in any pumping and fluid conditions, eliminating the damaging impact of cavitation and pulsation.
RC Series — RC20, RC25 & RC40 HiFlow Series — R80 & R82
